From a small repair to a whole-home project

Residential electrical services.

Find the electrical work that fits your home, compare estimated pricing, and talk directly with True about the right scope.

179 matching jobs

Bathroom & laundry exhaust fansExisting-fan replacement $300–$600 · New-location installation $600–$1,100. Labor and materials included; permits, tax and additional ductwork separate.

EV Chargers & Electrification

Tesla Wall Connector installation

$729–$1,620 per charger circuit

Run a dedicated circuit, mount a customer-supplied charger and commission charging limits.

Universal hardwired Level 2 charger

$729–$1,620 per charger circuit

Wire and commission a compatible customer-supplied Level 2 charger.

NEMA 14-50 EV charging outlet

$900–$1,980 per circuit

Install a dedicated 240V circuit with a heavy-duty 14-50 receptacle and applicable protection.

NEMA 6-50 EV receptacle

$810–$1,800 per circuit

Install a dedicated 240V circuit and heavy-duty 6-50 receptacle for compatible equipment.

Dual EV chargers with power sharing

$1,620–$3,420 per two-charger setup

Install two compatible chargers and configure shared charging capacity.

EV charging load management

$1,080–$2,250 per device add-on

Install compatible sensing and control equipment that limits EV demand when household load rises.

Pedestal / freestanding EV charger

$1,620–$3,600 per project

Mount a customer-supplied charger on a pedestal and connect its branch circuit.

EV charger circuit extension / relocation

$450–$1,170 per relocation

Extend an existing suitable EV circuit and remount the charger.

Heavy-duty 50A receptacle upgrade

$225–$450 per receptacle

Replace a light-duty 50A receptacle with a suitable Hubbell/Bryant-type device.

EV Wi-Fi setup and load-limit commissioning

$135–$315 per standalone visit

Connect a compatible charger to the network and verify settings and operating limits.

Induction cooktop circuit conversion

$900–$1,980 per circuit

Provide a suitably sized 240V branch circuit for a customer-supplied induction cooktop.

Heat-pump water heater circuit

$675–$1,350 per circuit

Install the dedicated electrical supply required by the chosen heat-pump water heater.

Main Electrical Service & Panels

100A to 200A electrical service upgrade

$4,950–$9,000 per project

Increase service capacity with a new panel, meter equipment, service conductors and grounding as needed.

200A to 400A / dual 200A service upgrade

$10,800–$22,500 per project

Install larger service equipment and distribution for substantially higher household demand.

Main panel replacement · same amperage

$3,150–$5,400 per panel

Replace the existing breaker panel and transfer existing branch circuits without increasing service size.

Federal Pacific, Zinsco & split-bus panel replacement

$3,600–$6,300 per panel

Replace an obsolete panel and reconnect serviceable branch circuits to modern protection.

Meter base / socket replacement

$1,620–$3,600 per project

Replace the customer-owned meter enclosure and coordinate utility disconnect and reconnect.

Service entrance cable / mast / weatherhead replacement

$1,800–$4,500 per project

Renew deteriorated service conductors and overhead attachment equipment.

Main breaker replacement

$540–$1,350 per breaker

Replace a failed main breaker with a compatible listed unit and verify connections.

Standard circuit breaker replacement

$180–$315 per breaker

Replace one failed standard branch-circuit breaker and test the circuit.

Dual-function AFCI/GFCI breaker addition or replacement

$247.50–$450 per breaker

Install a compatible breaker providing both arc-fault and ground-fault protection.

Whole-home surge protection

$315–$720 per device

Install a panel-mounted surge protective device to reduce transient voltage exposure.

Whole-home energy monitor / smart panel monitoring

$450–$900 per monitor

Install an add-on current-transformer energy monitor and configure its app.

Grounding electrode and bonding upgrade

$720–$1,800 per project

Improve grounding electrodes and accessible water-pipe and intersystem bonding connections.

Panel labeling, tracing and directory

$270–$720 per panel

Identify branch circuits and prepare a readable panel directory.

Underground electrical service relocation

$7,200–$16,200 per electrical scope

Relocate customer-owned service equipment and install the underground service raceway and related wiring.

Subpanels & Feeder Circuits

Attached-garage subpanel installation

$1,620–$3,150 per project

Install a feeder, breaker and subpanel to supply garage circuits.

Basement / second-floor subpanel

$1,800–$4,050 per project

Add distribution closer to new loads with a feeder from the main panel.

Detached shed & workshop subpanel

$2,250–$4,950 per project

Feed a detached building and install its subpanel and required grounding components.

ADU / DADU subpanel and feeder

$3,150–$6,750 per project

Provide a dedicated feeder and distribution panel for an accessory dwelling.

Feeder replacement / upsizing

$1,350–$3,600 per feeder

Replace an undersized or damaged feeder and update terminations and protection.

Exterior disconnect switch

$540–$1,440 per disconnect

Install a suitable outdoor disconnect for equipment or a feeder.

Subpanel neutral / ground isolation correction

$315–$810 per panel

Separate neutral and equipment grounding connections and correct inappropriate bonding.

Temporary construction power

$1,800–$4,050 per setup

Install a temporary pole or pedestal, distribution panel and jobsite receptacles.

Whole-Home Rewiring & Older Home Safety

Complete rewire, vacant / open-wall remodel

$16,200–$31,500 per 1500–2000 sq ft home

Replace branch wiring, standard devices and required branch protection throughout an accessible home.

Occupied-home & phased rewiring

$22,500–$45,000 per 1500–2000 sq ft home

Replace branch wiring while staging outages and access around an occupied household.

Knob-and-tube inspection and active tracing

$315–$810 per assessment

Determine which accessible old wiring remains energized and map affected areas.

Knob-and-tube replacement · attic & crawlspace

$1,080–$2,250 per circuit

Replace one accessible old branch circuit with grounded cable and modern terminations.

Knob-and-tube replacement, finished areas

$1,620–$3,600 per circuit

Fish new grounded wiring to replace an old circuit through finished living spaces.

Aluminum branch-wiring evaluation

$315–$720 per assessment

Inspect representative accessible aluminum terminations and define a repair scope.

Aluminum branch-wiring connection remediation

$81–$162 per device box in batch

Assess accessible aluminum branch-circuit connections and scope a compatible repair or replacement approach.

Ungrounded cloth-jacketed branch circuit replacement

$1,080–$2,700 per circuit

Replace an ungrounded branch circuit with new grounded cable and required devices/protection.

Equipment grounding conductor retrofit

$270–$630 per outlet location

Add a permitted equipment grounding path to an existing serviceable circuit location.

Junction-box discovery and splice enclosure

$315–$810 per small repair visit

Trace a suspect splice, expose it where practical and install accessible electrical enclosures.

Open splice remediation

$112.50–$270 per splice location in batch

Enclose an exposed splice in a suitable accessible box and correct connections.

Abandoned wiring tracing and removal

$360–$1,080 per small project

Verify wiring is inactive, disconnect it safely and remove accessible abandoned sections.

Outlets, Receptacles & Safety Devices

Standard 15A / 20A duplex replacement

$157.50–$270 per single-location visit

Replace an existing receptacle and cover and check polarity, grounding and connections.

New duplex outlet in drywall

$270–$540 per location

Add a wall receptacle by extending a nearby suitable circuit.

New duplex outlet in lath and plaster

$360–$720 per location

Add a receptacle with careful cutting and wire fishing through plaster construction.

GFCI outlet installation

$202.50–$360 per existing location

Install a GFCI receptacle and test its operation and downstream connections.

GFCI breaker / receptacle conversion

$247.50–$495 per circuit

Move ground-fault protection to an appropriate breaker or receptacle arrangement.

AFCI receptacle installation

$225–$405 per location

Install an outlet-type AFCI where that method is permitted for the existing circuit.

USB-A / USB-C charging receptacle

$202.50–$360 per location

Replace a standard outlet with a compatible integrated USB charging receptacle.

Whole-house tamper-resistant receptacle upgrade

$1,620–$3,150 per 40 receptacles

Replace approximately 40 existing outlets and covers with tamper-resistant devices.

Recessed outlet for a wall-mounted TV

$270–$585 per location

Install a recessed power box behind a television from a nearby suitable circuit.

In-cabinet hidden outlet

$315–$675 per location

Add power inside an appliance garage or medicine cabinet using suitable equipment.

Powered drawer outlet with shutoff

$495–$990 per drawer

Install a listed in-drawer power assembly with its required safety control.

Floor-box receptacle

$540–$1,080 per location

Install a listed floor box and receptacle with accessible wiring from below.

Weather-resistant exterior outlet and in-use cover

$315–$630 per new location

Add a weather-resistant, protected receptacle with a suitable exterior box and cover.

Heavy-duty 20A receptacle

$180–$315 per location

Install a specification-grade receptacle on an appropriate existing circuit.

Two-prong to labeled GFCI three-prong conversion

$202.50–$360 per location

Provide GFCI protection and required labeling where a grounding conductor is absent.

Half-hot switched outlet to unswitched

$180–$315 per location

Reconfigure an existing split receptacle so both halves remain powered.

Light Switches & Dimmers

Single-pole toggle / rocker switch replacement

$157.50–$247.50 per single-location visit

Replace a standard switch and cover and verify operation.

Three-way switch diagnosis and replacement

$225–$450 per switch circuit

Identify the common/traveler conductors and replace faulty three-way controls.

Four-way multi-location switch installation

$360–$810 per added control location

Add an intermediate control point to a compatible lighting circuit.

Single-pole LED dimmer

$180–$315 per location

Install an LED-compatible dimmer and check dimming performance.

Multi-location LED dimmer and companion

$315–$585 per two-location set

Install a compatible main dimmer and companion for one lighting load.

Motion / occupancy / vacancy wall switch

$202.50–$360 per location

Replace a switch with a sensor control and adjust detection and timeout.

Countdown timer switch

$202.50–$337.50 per location

Install a timer for a compatible bath fan, heater control or other load.

Astronomical exterior-light timer

$225–$405 per location

Install and program a timer that follows sunrise and sunset for exterior lighting.

Low-voltage relay lighting upgrade

$1,800–$5,400 per 4–8 controlled loads

Modernize an older small relay-based lighting arrangement and its controls.

Wireless kinetic switch and receiver

$270–$585 per control set

Add a compatible self-powered wireless switch with a wired receiver at the load.

Vintage-style push-button switch

$225–$405 per location

Replace a control with a listed vintage-style push-button switch and plate.

Smart switch / dimmer, Wi-Fi or Lutron Caseta

$225–$405 per location

Install a compatible smart control, pair it and test operation.

Neutral wire pull to switch box

$315–$720 per box

Provide a neutral through a suitable new cable route where the selected control requires one.

Interior Lighting & Fixtures

Canless LED recessed lighting installation

$157.50–$315 per light in 4+ light project

Cut an opening, wire and install a standard integrated LED wafer light.

New-construction recessed lighting rough-in

$540–$1,080 per room with 6 lights

Lay out six lighting positions and install rough-in wiring, boxes/supports and switch wiring.

Recessed LED retrofit kit

$67.50–$135 per light in batch

Replace an existing lamp and trim with a compatible LED retrofit module.

Dining chandelier, ceiling up to 10 ft

$225–$495 per fixture

Assemble, hang and connect a customer-supplied chandelier at an existing location.

Two-story foyer / high-ceiling chandelier

$810–$1,980 per fixture

Replace a customer-supplied chandelier using suitable elevated access equipment.

Motorized chandelier hoist

$2,700–$5,400 per system

Install a lifting motor, electrical supply and controls for a serviceable chandelier.

Kitchen island pendants, wiring and hanging

$810–$1,620 per three pendants

Rough in three ceiling locations and hang customer-supplied pendants.

Hardwired under-cabinet LED lighting

$810–$1,800 per 15–25 ft kitchen run

Install LED lighting, a compatible driver and a wall control under kitchen cabinets.

Over-cabinet LED accents

$630–$1,350 per 15–25 ft run

Add concealed LED strips, a driver and switching above cabinets.

Toe-kick accent lighting

$630–$1,440 per 15–25 ft run

Install low-profile LED lighting and a suitable driver beneath cabinet toe kicks.

Track lighting installation / replacement

$225–$540 per track system

Mount and connect a customer-supplied short track system at an existing powered location.

Flush / semi-flush ceiling fixture replacement

$157.50–$315 per fixture

Remove an existing fixture and install a customer-supplied replacement.

Wall sconce at a new location

$315–$675 per sconce location

Add a wall box and short concealed wiring route and mount a supplied sconce.

Bathroom vanity light replacement

$180–$360 per fixture

Replace a vanity light at an existing powered box and verify support.

Recessed stair / riser lighting

$225–$450 per light in multi-light project

Install a standard step light and connect it to a suitable lighting supply.

Closet light with door-jamb control

$405–$810 per closet

Add a suitable enclosed fixture and a door-operated control with nearby power.

Picture / art spotlight

$270–$585 per location

Add a focused light connection and install a customer-supplied picture light or spotlight.

Exterior, Landscape & Security Lighting

Exterior wall / coach light replacement

$180–$360 per fixture

Replace a customer-supplied exterior light and weather-seal the mounting point.

Motion security floodlight

$270–$540 per fixture

Install and aim a standard motion-activated LED floodlight at an existing feed.

Ring / Nest / Arlo floodlight camera

$225–$450 per existing powered location

Mount a customer-supplied hardwired camera light and configure basic operation.

Soffit recessed downlight

$225–$450 per light in batch

Cut a soffit opening, install a suitable downlight and connect a shared lighting run.

Landscape transformer and wiring

$810–$1,620 per starter infrastructure

Install a low-voltage transformer and approximately 100–150 ft of landscape cable.

Landscape pathway light

$135–$270 per fixture in batch

Supply and install a standard pathway light on an existing suitable low-voltage system.

Tree uplight / architectural landscape accent

$180–$360 per fixture in batch

Install and aim a standard low-voltage accent light.

Deck post-cap / stair low-voltage lighting

$157.50–$315 per fixture in batch

Install a standard deck light and conceal a short cable route where accessible.

Patio / pergola string or pendant lighting

$630–$1,620 per one patio

Install outdoor-rated lighting connections, support and controls for a modest patio.

Post-top yard light and pole

$1,080–$2,520 per light assembly

Install a standard yard-light pole and fixture and connect a nearby electrical feed.

Dusk-to-dawn photocell

$202.50–$360 per sensor

Replace or add a compatible photocell to control existing exterior lighting.

Underground conduit and wiring for yard lights

$13.50–$31.50 per linear foot

Install a small branch-circuit raceway and conductors in a prepared trench.

Holiday-light eave outlet with timer

$495–$990 per outlet and control

Add an eave receptacle and timer control from a suitable nearby circuit.

Permanent exterior smart lighting, Govee / pro track

$22.50–$40.50 per linear foot, pro system

Supply and install a permanent professional track-lighting system with standard controls.

Pool / pond / water-feature lighting circuit

$1,080–$2,700 per electrical circuit

Provide a protected lighting circuit, appropriate controls and equipment connections for a water feature.

Dedicated Appliance Circuits

Electric range & cooktop dedicated circuit

$900–$1,980 per circuit

Install a new 240V branch circuit and appropriate range connection.

Wall oven / double oven 40A–50A circuit

$990–$2,160 per circuit

Install a suitably rated 240V circuit and junction-box connection for an oven.

Microwave hood 20A circuit

$585–$1,080 per circuit

Add a dedicated 120V circuit and accessible receptacle for an over-range microwave.

Dishwasher and disposal, two dedicated circuits

$990–$1,800 per two circuits

Run separate appliance circuits with suitable connections and protection.

Refrigerator dedicated 20A circuit

$585–$1,080 per circuit

Install a dedicated receptacle circuit for a refrigerator.

Freezer dedicated circuit

$585–$1,080 per circuit

Add a dedicated freezer receptacle and appropriate circuit protection.

Dryer 30A four-prong circuit

$765–$1,530 per circuit

Run a new four-wire dryer branch circuit and install its receptacle.

Dryer three-wire to four-wire upgrade

$675–$1,440 per circuit replacement

Replace an old three-wire dryer circuit with a suitable four-wire circuit and receptacle.

Central AC circuit and disconnect

$810–$1,710 per outdoor unit

Install the condenser branch circuit, outdoor disconnect and final electrical connection.

Heat-pump & mini-split electrical circuit

$720–$1,530 per outdoor unit

Provide a dedicated supply and disconnect for a customer-supplied outdoor heat-pump unit.

Electric tankless heater multi-circuit supply

$1,620–$3,600 per heater electrical supply

Install multiple branch circuits required by an electric tankless water heater.

Electric tank water-heater circuit replacement

$630–$1,260 per circuit

Replace a typical 30A water-heater circuit and make the final electrical connection.

Hot-tub & spa electrical hookup

$1,350–$2,700 per spa hookup

Provide the spa supply, disconnect/protection and equipment grounding and bonding applicable to the installation.

Swim-spa electrical hookup

$1,800–$4,050 per spa hookup

Install the electrical feeds and disconnect arrangement required by a swim spa.

Sauna 240V heater circuit

$900–$1,980 per circuit

Install the heater supply and make connections according to the specific sauna system requirements.

Sump-pump dedicated protected circuit

$585–$1,170 per circuit

Add a dedicated pump receptacle/circuit with applicable protection.

Sewage ejector circuit and high-water alarm

$900–$1,800 per pump and alarm setup

Provide pump power plus an appropriate high-water alarm supply and basic alarm equipment.

Ventilation, Fans & Electric Heating

Ceiling fan on existing fan-rated box

$225–$405 per fan

Assemble and install a customer-supplied fan and test its controls and balance.

Ceiling fan with new fan-rated brace box

$405–$720 per fan

Upgrade the ceiling support and install a customer-supplied fan.

High-ceiling fan, 12+ ft

$585–$1,260 per fan

Install a customer-supplied fan and compatible downrod using elevated access equipment.

Covered-patio ceiling fan

$315–$630 per fan

Install a customer-supplied damp/wet-location-appropriate fan at an existing powered location.

Bathroom exhaust fan replacement

$300–$600 per fan

Replace a standard bathroom exhaust fan, including labor and materials, at an existing fan location.

New bathroom exhaust-fan installation

$600–$1,100 per new fan location

Install an exhaust fan at a new bathroom or laundry-room location with suitable electrical supply and control.

Heat-lamp / fan / night-light combination wiring

$675–$1,350 per unit electrical supply

Provide the supply and multi-function switching for a combination bath unit.

Whole-house ventilation fan electrical connection

$360–$720 per unit

Provide a short power route and electrical connection/control hookup for a ventilation fan.

Attic gable / roof fan wiring

$360–$765 per powered fan

Wire an electric attic fan and its compatible thermostat or control.

Electric baseboard heater replacement

$360–$720 per heater

Supply and replace a standard baseboard heater using a suitable existing circuit.

Cadet / fan-forced wall heater replacement

$360–$765 per heater

Replace a standard wall heater and verify circuit and control compatibility.

Line-voltage digital thermostat

$225–$405 per thermostat

Replace a line-voltage heater thermostat with a compatible programmable model.

Electric floor-heat wiring, sensor and thermostat

$720–$1,440 per bathroom connection

Provide a suitable circuit and connect/test a supplied floor-heating mat and sensor with a standard thermostat.

Roof / gutter de-icing circuit

$765–$1,530 per circuit and control

Add a protected circuit and suitable control/power connection for a de-icing system.

Generators & Emergency Backup Power

Manual transfer switch, 6–10 circuits

$1,350–$2,700 per system

Install a manual transfer arrangement for selected essential household circuits.

Portable-generator interlock kits

$405–$810 per interlock add-on

Install a panel-compatible interlock, generator breaker and required labeling.

30A generator inlet, L14-30

$585–$1,080 per inlet and wiring

Install an outdoor generator inlet and suitable wiring back to transfer equipment.

50A generator inlet, listed 4-wire type

$720–$1,350 per inlet and wiring

Install a suitable 50A male power inlet and wiring to compatible transfer equipment.

Critical-loads backup subpanel

$1,350–$2,700 per subpanel

Move selected essential circuits into a backup-ready subpanel.

Portable battery home-panel integration

$2,700–$5,400 per integration system

Install a compatible battery integration panel and connect selected household circuits.

Home battery storage installation

$11,700–$17,100 per one 10–15 kwh system

Install one battery system with required controls and standard backup interconnection.

Existing generator inlet test and tutorial

$225–$450 per visit

Inspect the existing transfer arrangement, perform an operating test and explain normal use.

Detached Structures, Garages & Trenching

Electrical trenching in dirt / grass

$13.50–$31.50 per linear foot

Excavate and backfill an ordinary electrical trench in accessible soil.

Concrete / asphalt saw-cut, trench and patch

$67.50–$157.50 per linear foot

Open a narrow paved route, excavate and restore a basic strip after electrical work.

Underground PVC / rigid metal conduit

$7.20–$18 per linear foot, PVC

Install raceway with fittings in an open prepared trench.

Direct-burial UF-B cable

$7.20–$16.20 per linear foot

Supply and place a small UF-B branch-circuit cable in a prepared suitable trench.

Detached garage complete wiring

$5,400–$10,800 per 400–600 sq ft garage

Install a feeder/subpanel, basic lights and roughly 6–10 receptacles in an open-framed garage.

Detached workshop complete wiring

$7,200–$14,400 per 600–1000 sq ft shop

Provide a subpanel, basic lighting/outlets and circuits for a welder, compressor and dust collector.

Shed lighting and convenience outlets

$1,620–$3,420 per 100–200 sq ft shed

Provide a small electrical supply, one or two lights and a few receptacles.

Greenhouse power, ventilation and heating outlets

$2,250–$4,950 per small greenhouse

Install suitable supply wiring, protected outlets and power connections for fans and modest heating.

Backyard studio / office-pod electrical run

$1,800–$4,050 per feeder connection

Run power to a prewired backyard studio and connect a small distribution arrangement.

Driveway gate power run

$1,080–$2,700 per gate supply

Provide a suitable electrical feed and low-voltage/control route for a gate operator.

Outdoor kitchen / BBQ island electrical

$1,620–$4,050 per small island

Install one or two circuits, weather-appropriate receptacles and basic lighting connections.

RV 30A / 50A pedestal receptacle

$1,260–$2,700 per rv hookup

Install a suitable RV supply and outdoor pedestal or receptacle assembly.

Smart Home, Low Voltage & Security

Hardwired video doorbell

$202.50–$405 per doorbell

Connect and configure a customer-supplied video doorbell using existing suitable wiring.

Doorbell transformer replacement

$202.50–$360 per transformer

Replace the transformer with a suitable voltage/VA-rated unit and test the doorbell.

Whole-house hardwired smoke / CO replacement

$585–$1,080 per six alarms

Replace approximately six hardwired alarms with a compatible mix of smoke and smoke/CO devices.

Interconnected alarms in an older home

$1,080–$2,250 per six-alarm system

Install a compatible alarm network using new wiring or an approved listed interconnection approach.

Structured media cabinet and organization

$675–$1,440 per cabinet

Install a residential low-voltage cabinet and organize/terminate existing home cabling.

Cat6 & Cat6a home Ethernet cabling

$225–$450 per drop in multi-drop project

Run, terminate, label and test one home Ethernet cable between two locations.

Ceiling Wi-Fi access-point drop and PoE

$315–$585 per location

Run and terminate a data cable and mount a customer-supplied access point.

Coax cable run / termination

$180–$360 per drop

Install a coaxial cable route and terminate it at a wall plate or equipment point.

Ceiling speaker wiring and volume control

$450–$900 per stereo pair / zone

Run cable for two speakers and install a suitable wall volume-control connection.

Concealed tablet / screen power

$270–$540 per location

Provide a suitable concealed power supply or recessed connection for a fixed screen.

Safety, Troubleshooting & Corrections

Home electrical safety assessment

$270–$540 per home assessment

Inspect accessible electrical equipment and provide a written list of observed concerns.

Home-inspection correction punch list

$540–$1,800 per small punch list

Correct several minor electrical findings such as devices, covers, labeling and accessible connections.